After a basement wall crack has been repaired, the homeowner may either let the dried surface seal remain on the wall or decide to remove it by chipping or grinding at it. With Emecole’s Seal-n-Peel Surface Seal, the surface seal and ports can easily be removed once the injection material has completed cured inside the crack(s). The surface seal and ports are stripped starting from the top and peeled off the wall in one easy step. Emecole’s Seal-n-Peel Surface Seal is available with the 10ft. D-I-Y Seal-n-Peel Foundation Crack Repair Kit.

With Seal-n-Peel Surface Seal, all repairs become almost invisible with the removal of the surface seal, which is helpful, especially if the home is going on the market in the near future.

Our 10 ft. concrete crack repair kit allows the D-I-Y homeowner or handymen to use the same materials that we supply professional contractors.

Starting At:	$168.00

The most effective way to repair cracks in concrete poured foundation walls is by injection with a liquid polymer at a low pressure. Emecole's 10 ft. Seal-n-Peel D-I-Y Foundation Wall Crack Repair Kit uses a two component hydrophobic urethane foam, which reacts with moisture within the crack to expand and fill all voids.

The Emecole 10 ft. D-I-Y Foundation Wall Crack Repair Kit enables any D-I-Y homeowner or handyman to easily and permanently repair any poured concrete foundation wall crack up to 10 feet.

All Emecole crack repair kits come equipped with written easy-to-follow preparation and procedure instructions to ensure the job will easily get done right. Also included is a step-by-step CD-ROM instructional video, easily allowing the homeowner to visualize the crack repair process with use of an Emecole kit.

For additional in-depth information on concrete crack repair, click here for our resource articles.

10 ft. Seal-n-Peel Kit

• Two cartridges Emecole Seal-n-Peel Port Adhesive
  
• Two wooden sticks
• Fifteen surface ports and caps
  
• Two cartridges Emecole Injection Polyurethane Resin
  
• Two 3/8x24 mixing nozzles (for use with Injection Resin)
  
• Injection hose assembly with white plastic shut-off valve
  
• Safety glasses
  
• Water bottle
  
• Two pair nitrile gloves
  
• Plastic trowel & wire brush
  
• Drop cloth
  
• Print instructions and step-by-step instructional CD-ROM
  
• Product Data Sheets & MSDS
  

Required Tools (not included):

• Standard caulking gun
  
• Paper plate or scrap cardboard for mixing Surface Seal and Port Adhesive
  
• Clean used plastic bottle (soap, ketchup) filled 1-2 cups of water