Concrete crack repair with the Emecole 30 ft. DIY Foundation Crack Repair Kit is equipped with the necessary components, packed conveniently within a toolbox, for the proper repair of poured foundation wall cracks up to 30 feet using low-pressure injection.

View Step-by-step Instructional Video

Starting At:	$385.00

The most effective way to repair cracks in concrete poured foundation walls is via injection with a liquid polymer at a low pressure. Emecole's do-it-yourself kits use either two component hydrophobic urethane foam (which reacts with moisture within the crack to expand and fill all voids) or two component low viscosity fast setting epoxy.

The Emecole 30 ft. DIY Foundation Crack Repair Kit enables any do-it-yourselfer to easily and permanently repair any poured concrete foundation wall crack up to 30 feet.

All Emecole crack repair kits come equipped with written easy-to-follow preparation and procedure instructions to ensure the job will easily get done right. Also included is a step-by-step CD-ROM instructional video, easily allowing a do-it-yourselfer to visualize the crack repair process with use of the Emecole kit.

30 ft. Foundation Crack Repair Kit with Urethane Foam

• Three dual cartridges Emecole 901 Surface seal
  
• Three dual cartridges Emecole 102 Urethane Foam
  
• Syringe 455-0.5 Fast Blow Hole Repair/Port Adhesive
  
• Four 1/4 x 24 element mixers & 4 retaining nuts
  
• Six cross-over restrictors
  
• Fifty surface ports and caps
  
• Ten corner ports
  
• Four hose assemblies
  
• Manual dispensing tool (300/300)
  
• Safety glasses
  
• Five pair rubber gloves
  
• Trowel & wire brush
  
• Step-by-step instructional CD-ROM
  
• MSDSs/PDs/How to Use Jake Tool
  
• Tool box
  

30 ft. Foundation Crack Repair Kit with Epoxy

• Three dual cartridges Emecole 901 Surface Seal
  
• Six dual cartridges Emecole 101 LV Epoxy
  
• Syringe 455-0.5 Fast Blow Hole Repair/Port Adhesive
  
• Six 1/4 x 32 element mixers & 6 retaining nuts
  
• Six cross-over restrictors
  
• Fifty surface ports and caps
  
• Ten corner ports
  
• Four hose assemblies
  
• Manual dispensing tool (300/300)
  
• Safety glasses
  
• Five pair rubber gloves
  
• Trowel & wire brush
  
• Step-by-step instructional CD-ROM
  
• MSDSs/PDs/How to Use Jake Tool
  
• Tool box
  

Injection by Urethane Foam vs. Epoxy:
Emecole's 30 ft. DIY Foundation Crack Repair Kits are available with either urethane foam or epoxy injection.

Emecole's two component urethane rapidly expands when it comes in contact with moisture. Filling voids both within the crack and behind the wall, quickly hardening to a flexible and permanent repair.

When the structural integrity of the concrete is a problem, or believed to be a problem, epoxy is the preferred material for injection. Epoxies effectively seal cracks while reinforcing the repair area to be stronger than the non-repaired area around it.

For additional information on concrete crack repair, click here for our resource articles