Carbon fiber reinforcement for slab repairs is quick and efficient for any do-it-yourselfer with Emecole's CFR Slab Repair Accessory Kit, properly accommodating Emecole's standard Slab Repair Kit.

Emecole's CFR Slab Accessory kit features 18 Carbon Fiber Stitching Dogs.

Kit components also include:

• Emecole 555 dual cartridge
  
• 3/16 x 48 element mixers
  
• Retaining nut – Euro Thread (white – 9 pitch)
  
• Dispensing needle tips
  
• Cross-over restrictors
  
• Repair Instructions
  
• MSDSs/PDs

Starting At:	$79.00

Carbon Fiber Stitching Dogs are designed to enhance Emecole's tough and dependable Emecole 555 fast repair adhesive. Stitching Dogs are packaged 18 to a single sheet. Stitching Dogs separate into individual dogs.

Carbon Fiber Stitching Dogs add 1320 PSI tensile to assure the longevity of a slab crack repair. Stitching dogs are ideal for decorative overlay specialist. This product stabilizes the slab for trouble free polymer overlay installations. Best of all, overlay can be installed over this repair in just 30 minutes.

Stitching Dog Installation
After repairing a crack with Emecole 555 fast repair adhesive, install a 12 inch long, one and a half inch deep saw cut (depending on the thickness of the concrete) through the crack at a 90 degree angle. Fill saw cut with Emecole 555, install the stitching dog in saw cut while being careful to push it to bottom of the cut. Cap off with additional Emecole 555 to level and the installation is complete. For maximum strength and stability, install stitching dogs at 12 inch intervals.